ESP Firmware Export & Backup Tool
Export Firmware Backup
Plug an ESP development board into your computer with a USB cable, click "Connect Device" and pick it from the serial port list the browser pops up. The tool first detects the chip model and flash size, then reads the whole flash byte for byte from 0x0 and saves it as a local bin file — handy for firmware archiving, keeping a copy before reflashing, or a full restore. Everything happens inside the browser; the backup file is never uploaded to a server.
Export Full Flash Backup
Source
Device Flash
No device connected yet. Once connected, the chip model, flash size, flash ID and MAC appear here.
Export to
Local bin file
Backup Filename
Downloaded straight to your machine by the browser; the file never touches a server.
Tips
- Make sure the power supply is stable before exporting to avoid backup failure from a power cut mid-read.
- A full backup file is suitable for complete restore or firmware archiving; its size depends on the chip's flash capacity.
- Name backup files by device model so the source device can be verified later.
- If the browser reports the serial permission has expired, reselect the device before exporting again.
16302.COM — Doing is the fastest way to learn
© 2026 16302.COM. All rights reserved. 皖ICP备18006907号-2